(JUST ADDED: See the bottom of this tutorial for a PSD and a layerstyle that works in Photoshop CS6 and CC)
Start with a blank layer and some text, this will work for shapes too.
Right click/Cmd click on the layer name in the layers pallette. Select rasterize layer. Ctrl/Cmd click on the layer thumbnail to select the type.
Create a new blank layer.
Edit>stroke. I added a 6 pixel stroke here. Make the location center.
Ctrl/Cmd click on the layer thumbnail to select the new stroke.
In the layer palette, turn off the bottom layer, you should see the outline now.
Using the gradient tool: foreground to background linear – Black to white. apply a gradient to the selection.
Now apply the stroke again, this time 1 Pixel and set to outside.
To make the gradient look like metal, use our favorate curves trick.
Image>adjust>curves, use a similar curve to what is shown here.
Now display the bottom layer again and fill with a color or a gradient to get this result.
For a little extra depth apply a layer style to the outline, use a dropshadow.
Here is the result.
Another variation is to hide the fill and just use the outline with a dropshadow.
Here is yet another variation. This is just the previous image inverted. Ctrl/Cmd+I Note for this to work, you must flatten the image first.
Here is another variation. Play around with this effect and have fun.
See you in a week with another new tutorial.
All the CS6 information and more is available as a PDF magazine called the CS6 Superguide. If you’re on our list, you will receive it free by email as soon as it’s available. If not, sign up now and get the CS6 Superguide for free. Or click the image below.
The Lens correction filter is truly amazing, being able to repair all kinds of distortions. It can remedy the bulging...
How to Film a car chase using a DJI Phantom 2 Vision+ Quadcopter Drone. Using a drone to film a...