When you are shooting with a good camera and lens and the aperture is wide open, you can create a nice depth of field effect. This is used in portraiture photography. You know the look, it’s that prized, soft, out of focus background with the nice sharp subject. Then there are lights in the background, they turn into little sound disks, called light Bokeh (bo-kah). This is easily achieved in camera, if you have good enough gear. If you don’t have a nice DSLR camera, or you have an existing photography that you want to add production value, this tutorial will show you how to achieve this soft/out of focus effect in photoshop.
I’m going to show you how to create that soft dreamy background with this photograph. We have some of these little circles going on which is known as bokeh, but I’m going to make it much more pronounced and much more romantic. This is the kind of thing that usually would be achieved by using a very shallow depth of field and a very wide open aperture on the camera.
The first thing we’re going to do is cut these people out, and then, there’s a little trick I’m going to show you so we don’t get the fringing around the edges which usually happens when you blur the background, and then, we’re going to create this bokeh effect.
Why don’t we start off by just cutting them out quickly with the Quick Select Tool. Grab that Quick Select Tool and move it over the areas you need to select. Hold the Alt key or the Option key to remove from the selection.
It’s looking pretty good, but I just want to check my selection. Hit the Q for Quick Mask, to view in Quick mask. You are checking for areas left out. It’s looking not bad at all. Press Q to exit quickmask.
Choose the Select and Mask right now, and I’ll give it a little bit of radiance just to make it look better, and clean it up a little bit. We’re going to choose the new layer with a layer mask option.
We’ve got them cut out
Hide the top layer and select the bottom to see this as the background. So here’s the thing that happens; When people do a simple blurring of the background like this, notice this fringing we get around the edges there? You can see it’s almost like a halo effect or a doubling effect there. Hit the Cancel right there and let me show you a better way.
Here’s how we can do to eliminate this problem. With the background still as the active layer, Ctrl click on the layer mask to make a selection.
Choose Select, Modify, and expand this by 1 pixel, and then, choose Select, Modify, and feather it by 1 pixel. This is just creating a softer edge than just that hard edge.
Use Content Aware Fill. Hide the top layer so you can see what we are doing.
Press Shift + Delete on Mac, (Shift + Backspace on Windows), to bring up the Fill dialog box. Make sure you select Content Aware, and then, just click okay. You can see we got this kind of ghosting effect, but that’s all we need to make sure we don’t get those colors bleeding around the edges when we blur it later on.
Turn the top layer back on. We’re almost there.
Now, we want to create a soft blurred background, but we want to really enhance this bokeh in the background that comes from the lens, and that gives it that really nice romantic look. And that also makes it look like it was shot with a much more expensive lens.
So let’s make sure the background is selected, then we’re going to choose Filter>Blur Gallery>Field Blur
We’re doing this here inside of Photoshop CC/CS6. Now, the Blur Gallery was added in Photoshop CS6, (if you have an earlier version, just use the Blur>lens Blur, and you’re going to get a similar result.)
The Field Blur, is where we create a depth of field effect by applying two points normally. We’re just going to keep this single point create a blur. Right now, we’re at about a 15 blur and we really want to bring this effect out. It takes a little bit of experimentation to get it just right.
Start with Light Bokeh and we’re just going to move it up a little bit until we start to see some of that bokeh effect. Okay, it’s starting to happen, but it’s not very clean yet.
Play around with the Light Range. We’re going to actually clamp it down, and so we bring the white triangle in. Bring the black a bit more and, have these almost on top of each other to get the effect we’re looking for.
Let’s increase the blur; there we go, and notice, this changes the size of the round disks.
This is just really a balancing act of just playing around with the Light Bokeh, Light Range and Blur.
If we hide the top layer for a second and look at our background, notice it’s beautiful and seamless because we used that Content Aware Fill, there’s no fringing or anything around there, and so we’ve been able to create that effect just like that.
So if we’ll look at it before and after, you can see how much more dreamy and romantic this photograph is.
Masking impossible images in Photoshop (all versions)
Thanks so much for checking out this tutorial. The CAFE is so full of free resources, you should check them all out. I’m adding at least one new tutorial every week!
Great to see you here at the CAFE!
Leave a comment, say hi! (Join out mailing list and become part of the CAFE Crew and get a new tutorial every week)
How to cut out glass, smoke and liquids in Photoshop. Colin Smith shows you how to select semi transparent objects...
How to swap faces in Photoshop. This photoshop tutorial shows you an easy way to swap faces, for perfect group...