The Ultimate Photoshop Resource

Set color and tone in Photoshop in 3 clicks with eyedroppers (Easy Advanced color correction)


Using the amazing eyedroppers in Photoshop for single click color, lightness and shadow correction.

An often overlooked tool in Photoshop is the eyedroppers, They really are powerful once you know how to use them. This tutorial will shows you exacly how you can get quick and reliable color and luminance correction is Photoshop. I’m using Photoshop CC, but this will work with just about any version.

Watch the video and then read the step by step instructions, they compliment each other.

The eyedroppers can be found in many places in Photoshop such as Levels and Curves and they often get overlooked.

 

There are three eyedroppers:

  • Black: Sets the black point (darkest part of the image).
  • Gray: Sets the white balance.
  • White: Sets the white point (brightest part of the image).

The eye droppers are also found in the adjustment layers, such as levels and curves.

Before we correct the image, we need to calibrate, or more correctly, build in some headroom to the settings. This will allow subtle detail in blacks and whites to show thorugh.

Setting up the Eyedroppers (Only have to do this once)

Let’s start with the black point.

With the levels adjustment layer open, double-click the top eyedropper. (Must have a document open to use Adjustment Layers).

You will see a color picker. Change the B setting to 5.

Double click the bottom eyedropper (white).

Change the B setting to 95.

We have now given ourselves 5% headroom in the blacks and whites.

You will see a dialog box each time that offers to save new defaults, Click yes, you will never have to do this again, until you reinstall Photoshop or reset the preferences.

Setting the shadows and highlights of a photo using eye droppers in Photoshop

Let’s start with this photo that I shot in an underground parking building. Because of the flare from the car headlights, this image is lacking contrast (stong blacks). It also has a warm color cast. Lets fix it in 3 clicks.

Step 1. Setting the Shadows

Create a levels adjustment layer

Choose the Black eyedropper

Now we neeed to find the darkest point in the photo

Hold down the alt/Option key and drag the black triangle to the right. You will see clipping in the photo indicating where thae darkest points are located.

The darkest point in on the A/C duct on the ceiling. Click with the black eyedropper and the blacks now look really nice and rich.

 

Step 2. Setting the highlights

Let’s locate the brightest part of the photo.

Hold down Alt/Option key and drag the white triangle to the left. You will see clipping about the headlights of the car.

Sometimes, I ignore areas that are producing light (you should try it first) and look for other area that are the brightest but that may contain some pixel value (not blown out).

In this case, I clicked on the reflection in the car windshield with the white eyedropper. This brightens up the photo nicely.

Setting the color balance with Photoshop eye droppers

Now its time to set the white balance and remove the color cast.

Choose the gray dropper.

Look for an area in the photograph that should be a neutral gray or white. I know the wall should be gray.

Click on it with the gray eyedropper and look at that, the color cast has been removed.

 

I hope you enjoyed this little tutorial. The curves tutorial is here

If you like these kinds of techniques, you really should check out my flagship training: Photoshop CC for Digital Photographers. (Also available in CS5 and CS6 versions). This comprehensive training will teach you everything you need to know about working with photos in Photoshop and Ive been making this training for 15 years and 7 versions, improving on it with each version. You won’t find a better Photoshop resource anywhere.

 

Drop a comment and let me know if this tutorial was helpful, and don’t foget to sign up for our weekly newsletter to get more free tutorials and goodies!

 

Great to see you here at the CAFE

Colin Smith


26 responses to “Set color and tone in Photoshop in 3 clicks with eyedroppers (Easy Advanced color correction)”

  1. I realize this is a Photoshop web site, but could you get the same results in Lightroom using the black and white sliders and the white balance eyedropper? If not, why not?

  2. Colin, since about a year ago I mostly go to Camera Raw with 90 % of my images, but before that I used Levels most over curves because I usually just needed quick adjustments. Camera Raw gives me a little more variety in the adjustments I do and to me anyway, it is kinda a Curves-Levels combination with more control. I know 12 ways to do the same thing, this is one of my ways…

  3. Thanks for this one. Clarified a few points for me.

    I also like to use Alt + auto in curves, which selects further options.

  4. Where is the link to the tutorial using Curves that you reference at the end of the video.
    I have used the Auto button in LR to set the black and white points in the past but I will now do as you suggest in the above video. You are fantastic!!

  5. I have been trying for years to revive old Ektachrome slide duplicates. The copies were made after the colors degraded. I picked one photo at random that was all red and tried your tutorial on it. It worked. The photo went from all reds to one with greens and browns. The sky and water reflections are blown out, but the original from 1961 might not have been any better. Thanks a bunch. Only 499 more photos to go.

  6. First and second bits are OK – but knowing which bit should be gray is more difficult. And there are many different grays too!

  7. Thank you, Colin,
    I found this helpful, and I have bookmarked it under Adobe/Photoshop/Colin Smith. I have also been editing photos that have discoloring in them and want to match the discolored area with the rest of the areas in the pictures that are not discolored. I am already on your email list and receive your emails. Thank you for your videos.

  8. Another great tutorial Colin! As they say, time is money, so I’m always open to new ways to reliably reduce my editing time – and this method will help me do that. Please keep up the good work! I do basic editing in ACR (including white balance) and I tend towards Levels if I need to tweak in Photoshop.

  9. Thanks Colin, Enjoy your tutorials. I am older and just so pleased that you don’t rush through them, but take them slowly, enough time for me to focus and enjoy.

  10. Thanks again Colin for the explanation on the eyedroppers. I do use them but sometimes forget we have this simple correction tool…another great tidbit for us to have…thanks for doing the tutorials!

  11. Great! Effective as always, Colin.
    Another really great tutorial.
    I always use levels and curves for any color correction in photography. You can’t live without them.

  12. I always start in RAW and then will move on to others (curves/levels etc) using masking to refine the photo. I would love to see a tutorial showing how to get the same colors produced on the screen into the printer. I always have variations in color – most of which are not beneficial, and I let Photoshop manage the colors. I have the monitor set as a printer profile but still have issues. Would be great to see something like this added to your educational videos, which by the way, are extremely useful.

  13. Thank you for the eye dropper tutorial. I cannot find a suitable photograph to use, may I please have permission to use the one in the tutorial?

    Best regards,

    Jack

  14. I have found with some of my images (taken in RAW and manipulated in RAW first) do not respond to black and white set process, using the dropper and ALT. Sometimes when if fails in Levels it works in Curves or not with both. Gray option seems OK.
    Any ideas?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.


Access The Photoshop Vault

Unlock dozens of valuable Photoshop resources for FREE

The Ultimate

Photoshop Resource